Peterbilt 520EV, Руководство оператора

Страница: 38 / 43

37
Initiating Charging
1. Put the truck in neutral.
2. Engage the park brake.
3. Plug in the charger.
4. Wait until the charge port LED
shows the DC or AC charging status
(see Charge Port LED Status table).
Disconnecting Charger
The charge port LED will have a solid
green illumination (no flashing) when
100% state of charge has been reached.
If you need to remove the charge plug
before reaching 100% state of charge,
press the Charge Port LED/button to end
the charge.
If the charger plug has a button, you
may need to press the charger plug
button to disengage it too.
WARNING!
Ensure the park brake is engaged before
connecting the truck to a vehicle
charger. Failure to engage the park
brake before connecting the charger
cable could result in injury, death, or
equipment damage.