Peterbilt 520EV, Руководство оператора

Страница: 21 / 43

Y53-6158-1B1
(06/21)
on towing the truck with the drive tires
on the ground. How to Jump-Start a Battery
WARNING!
Do not allow the propulsion motors to
spin while towing the truck. Towing the
520EV (with the propulsion motors
spinning) will generate unsafe voltage
that
could permanently damage
equipment, cause personal harm, and
injure bystanders.
WARNING!
Do not tow this truck after an accident if
high
voltage components were
damaged. Refer to the first responders
field guide for more instructions on
towing. Failure to heed this warning
could result in injury, death, or
equipment damage.
DANGER!
Do not connect any components to the
propulsion battery packs. Only the low
voltage, lead acid batteries can be used
for jump-starting. Failure to heed this
warning WILL result in personal injury,
death, or equipment damage.
WARNING!
Never jump-start a battery near fire,
flames, or electrical sparks. Batteries
generate explosive gases. Keep sparks,
flame, and lighted cigarettes away from
the batteries. Failure to comply may
result in death, personal injury,
equipment or property damage.
WARNING!
Lead acid batteries contain an acid that
can burn and gasses that can explode.
Ignoring safety procedures may result in
death, personal injury, equipment, or
property damage.
WARNING!
If the low voltage, lead acid batteries are
frozen. Take them into a warm location
to thaw. Do NOT attempt to quickly
thaw the battery packs with high
temperatures. Failure to heed this
warning could result in severe personal
injury and equipment damage.