ACCOUNT CREATION
Before installing your first physical flyDetect® trap at a site, you must create an account on the flyDetect®
web application by visiting the link below. This can only be accessed from a desktop computer, or laptop.
https://flydetect.net/register
NOTE: You must have a valid flyDetect® serial number available, which is not currently registered on the
system in order to validate your account. The serial number is printed underneath the QR code located on
the right-hand side of your new flyDetect® trap.
Once your account has been created you can then set up clients/sites including sub-divisional areas and
assign servicing technicians to manage these accounts. The chosen technicians can then visit the site to
install and maintain the traps using the flyDetect® app on their mobile device.
VIEWING ACCOUNT CREATION
Viewing access can be granted to each of your clients/sites if desired. This will provide viewing access to all
archived images, along with showing the current alert status of all traps at their location.
If a viewing account is created, then ownership of all images taken by traps at that location will belong to
the viewing account.
This means that even if the client switches to a different pest controller, then the client will retain ownership
of all the images captured. The traps themselves, if owned by the client, will stay installed and running on
their site, ready for a new pest controller to take over servicing.
If the traps are owned by the pest controller, then the history will remain with the client, but the traps can
then be reinstalled elsewhere, with their new images being the property of the new client.
It is important to note that if a viewing account is not created prior to deleting traps from a customer’s site,
then their history will be permanently deleted and cannot be recovered.
4