PESA RCP-CSD, Руководство пользователя

Страница: 31 / 68

RCP-CSD
Chapter 3 – Operation 23
NOTE
Pressing PREV and NEXT will scroll through all of the destinations
in the Destination Include list, and display them in the Selection field.
However, only destinations which appear in a Data field pair (those
assigned to Data keys 45 through 188) may be selected.
If an attempt is made to select a destination which does not appear in
a Data Pair field, even though the desired destination appears in the
Selection field, it will not be selected when DEST is pressed to exit
Multi-Bus Destination Select mode. Instead, the selection will default
to the last destination associated with data keys 45 through 188 that
appeared in the Selection field when scrolling.
Care should be taken to ensure that when using PREV and NEXT, the
desired destination is displayed as a highlighted Data field pair.
Multi-Bus Source Copy
When in Multi-Bus mode, source selection may be made by copying the source already switched to a
destination as follows:
1. Press PAGE UP or PAGE DOWN until the desired source is displayed.
2. Press the corresponding Display Panel key to select the Data field pair containing the desired
source.
3. Press PRESET / COPY for at least one second.
The source name will be copied to the Selection field. After selecting the desired destination, a switch may
then be taken.