PESA Cheetah V5, Руководство по установке

Страница: 8 / 51

CHEETAH V5 MODULES 81-9059-0571-0 REV.B
8
V
IDEO
I
NPUT
/O
UTPUT
If possible, always use DVI output from your computer’s video card and DVI input to a monitor. This provides the optimum video signal. If you use a
VGA output from your graphic source, the DVI Local unit must digitize the signal prior to transmission. Similarly, if your remote TFT screen uses a
VGA input, it must digitize the signal from the Remote unit. In both cases, the built-in video processors must determine the resolution and pixel phase for
an optimized digitization. Your DVI Extender allows you to optimize the video signal manually or automatically using its on-screen utility (see
Chapter
4 ). If you are using a VGA input to a TFT monitor, please follow the manufacturer’s instructions.
You may have several possible options for video source output/monitor input. If this is the case, for the optimum video quality, please select the highest
ranked available combination from the following table:
Video Quality Local Unit input Remote Unit output
1 DVI DVI
2 DVI VGA
3 VGA DVI
4 VGA VGA