PESA Cheetah V5, Руководство по установке, Страница: 22 / 51

CHEETAH V5 MODULES 81-9059-0571-0 REV.B
22
O
PENING THE
OSD
You can access the OSD in two ways:
•
Using a standard terminal program with a serial connection to the programming port.
•
Using our small WINDOWS™ program with a serial connection to the programming port.
While the OSD is active, the mouse is locked and only menu keystrokes are allowed at the keyboard. To indicate that the OSD mode is active, the status
LEDs (Num Lock, Caps Lock and Scroll Lock) are flashed. There is a summary of OSD commands on page 9.
Using a standard terminal program with a serial connection
On all devices, you can use a terminal (or terminal software) for OSD access:
1. Connect the programming cable to the programming port of the Local (TX) unit.
2. Connect the programming cable to the serial port of a computer running a terminal client.
3. Set up the terminal to 115200 baud with 8 data bits, no parity and 1 stop bit, ASCII-mode.
4. Type in the following key sequence:
< O > + < S > + < D > followed by <ENTER>