PESA Cheetah V5, Руководство по установке

Страница: 31 / 51

31
Auto Configuration
Use the Auto Configuration submenu to define whether the Local unit carries out automatic detection of the number of pixels per line and the
best phase after a mode change (a change of screen resolution and/or refresh rate at the graphic source). Using automatic detection (while
displaying an appropriate test pattern) ensures an optimized image but the procedure introduces a delay in the picture appearing on the remote
console screen. If you want the picture to appear as fast as possible, and can tolerate a non-optimized image, you may want to disable this
feature. Please note that Auto Configuration is disabled in the default factory settings.
To view the Auto Configuration menu, select the Tools icon from the main menu and then select the Auto Configuration icon.
Figure 14 Auto-Configuration submenu
Disable Automatic detection of pixels per
line and phase after a mode change
Enable Automatic detection of pixels per
line and phase after a mode change
Back to Tools menu