PERRY ELECTRIC Srl
Via Milanese, 11
22070 VENIANO (CO)
ITALY www.perry.it
Telephone socket through 4-pin Rj11 connector with terminal connections, useful to realize a wall-socket
where to connect the telephone or ADSL modem.
PE - DEMCPE004 03/21
Important:
installation and electrical connections of devices and appliances must be carried out by skilled people and in compliance with
current regulations. The manufacturer declines any liability in connection with the use of products subject to special environmental and/or
installation standards.
Read this installation and use manual carefully The manual must be preserved with care for future reference.
.
The manufacturer reserves the right to introduce any technical and/or constructive changes deemed necessary, with no prior notice.
SAFETY WARNINGS
Cleaning
: once installed, the device requires no maintenance. Any special work after installation must be done by qualified personnel.
Use a slightly damp cloth for cleaning (do not use detergents).
•
is suitable for indoor installation, is designed to be installed
the device, 1 module telephone socket recess mounting in box type 503,
permanently built-in, and is compatible with the most commonly found residential series, thanks to the accessory front panel sold separately.
• This appliance must be intended only for the use for which it was built. Any other use must be considered improper and dangerous.
• Children should be supervised to ensure that they do not play with the device.
Protection category:
W
:
ire section at terminals
Operating Temperature:
CE marking reference
standard
provided by the telephone exchange
IP 20
0,2 mm² ÷ 1,5 mm²
-10° C ÷ +50° C
Power Requirement:
Pollution rating:
2
Installation:
built-in (1 residential module)
Rated impulse voltage:
2,5kV
max 70 mA dc
TECHNICAL DATA
Mod. 1MCPT001
Output port:
Storing temperature:
-10° C ÷ +60° C
Humidity:
0 ÷ 80% without condensation
Telephone socket through RJ11
Residential 1 mod. built-in installation
LVD EN 62368-1
Disposal of Old Electrical & Electronic Equipment, applicable in the European Union and other European countries with separate collection systems.
ENGLISH
Connection scheme internal to the socket
Continuous voltage:
max 70V dc
max 100V~ rms
&
AC call signal:
Maximum operating load:
Telephone socket RJ11 (on the front)
2
1
Rj11
socket
Terminal
Terminal
example installation
Connector RJ11
to connect
a phone or
ADSL modem
Connect the rigid cable
/ pair telephone line
The Axolute brand is property of the BTICINO SpA company.
The Arké fit brand is property of the VIMAR SpA company.
Frame/support of the chosen
residential series (not supplied)
IMPORTANT
: the front panel for the BTICINO
Axolute series
with the
is not compatible
corresponding
residential 2 module
frame/support.
IMPORTANT:
To assemble the
series,
Arké fit
the frame / support requires also a spacer.
See VIMAR catalogue.
COMPATIBILITY TO THE MOST COMMON RESIDENTIAL SERIES PLATES
Follow instructions contained in the specific compatibility sheet
contained in the package.
You can also consult the Perry catalog or use the
configurator on the site: www.perry.it.
Important!
The front panel
must be purchased
separately
