Permobil STREET Скачать руководство пользователя

Страница: 96 / 98

Owner’s Manual Street

Electromagnetic Interference

NOTE!

Other types of hand-held devices, such as cordless phones, laptop

computers, AM/FM radios, TV sets, CD players, and casette players, and small

appliances, such as electric shavers and hair dryers, so far we know, are not

likely to cause EMI problems to your powered wheelchair.
Because EM energy rapidly becomes more intense as one moves closer to the

transmitting antenna (source), the EM fields from hand-held radio wave sources

(transceivers) are of special concern. It is possible to unintentionally bring high

levels of EM energy very close to the powered wheelchair’s control system while

using these devices. This can affect powered wheelchair movement and brak-

ing. Therefore, the warnings listed below are recommended to prevent possible

interference with the control system of the powered wheelchair.

WARNINGS

Electromagnetic interference (EMI) from sources such as radio and TV stations,

amateur radio (HAM) transmitters, two-way radios, and cellular phones can

affect powered wheelchairs and motorized scooters. Following the warnings listed

below should reduced the chance of unintended wheel lock release or powered

wheelchair movement which could result in serious injury.

• Do not operate hand-held transceivers (transmitters/receivers), such as citi-

zens band (CB) radios, or turn ON personal communications devices, such

as cellular phones, while the powered wheelchair is turned ON.

• Be aware of nearby transmitters, such as radio or TV stations, and try to

avoid coming close to them.

• If unintended movement or wheel lock release occurs, turn the powered

wheelchair OFF as soon as it is safe.

• Be aware that adding accessories or components, or modifying the powered

wheelchair, may make it more susceptible to EMI.

NOTE!

There is no easy way to evaluate their effect on the overall immunity

of the powered wheelchair).

• Report all incidents of unintended movement or wheel lock release to the

powered wheelchair manufacturer, and note whether there is a radio wave

source near by.

Содержание STREET



































































































Результаты поиска

Содержание STREET

Отзывы:

Похожие инструкции для STREET

Бренды по названию

Популярные бренды

Permobil STREET, Руководство пользователя

Результаты поиска

Содержание STREET

Отзывы:

Похожие инструкции для STREET

Бренды по названию

Популярные бренды