Permobil STREET Скачать руководство пользователя страница 90

Страница: 90 / 98

Owner’s Manual Street

Trouble Shooting Guide

Diagnostics R-Net LCD

When an error or a fault occurs in the wheelchair’s electronics, information on it

is displayed in the control panel’s display. This information can then be used to

diagnose where the error/fault occurred and its cause.
Troubleshooting and repairs must always be performed by competent person-

nel with good knowledge of the wheelchair’s electronics. More information

on troubleshooting and remedies can be found in the Service Manual for this

wheelchair model.

Diagnostic screens

Current diagnostic screen

When the control system’s integrated protection circuits have been triggered

so that the control system can no longer operate the wheelchair, a diagnostic

screen is displayed in the control panel’s display.
This indicates a system fault, i.e. R-net has detected a problem somewhere in

the wheelchair’s electrical system.

NB!

If the fault is in a module that is not currently being used, it may still be

possible to drive the wheelchair, but the diagnostic screen is displayed occa-

sionally.

Switch off the wheelchair and leave it off for a few minutes. Then restart the

wheelchair. If the fault persists, you must switch off the wheelchair and contact

your service contact. Write down the information displayed in plain text in the

control panel’s display and pass it on to your service contact.
Do not use the wheelchair until the problem has been remedied or you have

received other instructions from your service contact.

Diagnostics should only be performed by persons with sound knowledge of the wheelchair’s elec-

tronic control system. Incorrect or poorly performed repair works may make it dangerous to use the

wheelchair. Permobil accepts no liability for any personal injury or damage to the wheelchair and

its surroundings that occurs on account of incorrect or poorly performed repair work.

WARNING

CAUTION

If any part is replaced without Permobil’s approval, the wheelchair’s warranty lapses. Permobil

accepts no liability for any loss that occurs as a a result of a component of the R-net control system

being opened, adjusted or modified without permission.

Содержание STREET



































































































Результаты поиска

Содержание STREET

Отзывы:

Бренды по названию

Популярные бренды

Permobil STREET, Руководство пользователя

Результаты поиска

Содержание STREET

Отзывы:

Бренды по названию

Популярные бренды