Permobil F3 Corpus Скачать руководство пользователя

Страница: 241 / 274

F3 Corpus

Maintenance and repairs

Figure 210. Assembling the rim.

Check that the wheel axis and rim are undamaged. Clean to
remove dirt and rust. Replace damaged parts.

Fit the spacer (A) on the axle.

Install the wheel (B) on the axle by hand without using any tools.
Make sure the rim is fully seated on the axle.

Use the screw (D) and washer (C) to install the wheel (B); do so
by hand without using any tools.

Tighten the screw (D) using a torque wrench. Tightening
torque: 24 Nm. Do not use a pneumatic impact wrench.

If the tyre is pneumatic, fill it to the recommended pressure. See
5.6.4

Inflating castor wheels, Page 243.

Fit hub cap (E).

Remove the blocks.

Lower the wheelchair using the jack.

241

Содержание F3 Corpus



















































































































































































































































































Результаты поиска

Содержание F3 Corpus

Отзывы:

Похожие инструкции для F3 Corpus

Бренды по названию

Популярные бренды

Permobil F3 Corpus, Руководство пользователя

Результаты поиска

Содержание F3 Corpus

Отзывы:

Похожие инструкции для F3 Corpus

Бренды по названию

Популярные бренды