Permobil F3 Corpus, Руководство пользователя

Страница: 130 / 274

F3 Corpus
Getting to know your wheelchair
Storing memory
Figure 115. Memory function.
Before storing a seating position in the memory, configure the seat
system in the desired position.
1. Enter memory mode by pressing and holding the memory
button (8) for two seconds. While in the memory mode, the
LED flashes green.
2. Press and hold button (4) until the LED immediately to the left
of the Memory LED lights up green. Memory is now enabled
and ready to memorise a seat position.
3. Press and hold the desired Store button (5, 6 or 7) for three
seconds to memorise the current seat position. The LED above
the memory position will light up red and the control panel will
beep once the memory is successfully stored.
4. Return to standard seat function operating mode by pressing the
Memory button (8).
3.6 Accessories
Accessories for Permobil products are subject to continuous
development. Contact your nearest Permobil dealer for more
information on the accessories available for your product.
130