© 2019 - perma-tec
GmbH & Co. KG
| www.perma-tec.com
I
64
63
I
perma STAR VARIO
Translation of the Original Operating Instructions
en
= Attention: Danger
To prevent the lubrication system from posing any risks, the operator must ensure
that:
-
only qualifi ed personnel work on and with the lubrication system;
-
personnel keep the Operating Instructions to hand when carrying out all relevant
work and comply with them;
-
the necessary accident prevention and safety regulations are adhered to during
installation or maintenance work;
-
the lubrication system is used properly and in accordance with its intended purpose
and is not incorrectly adjusted or modifi ed.
Observe safety data sheets of oil / grease.
Avoid contact of oil / grease with eyes, skin and clothing; also avoid swallowing of
oil / grease.
Prevent oil / grease from getting into soil or sewer system.
Oil / grease on traffi c routes will increase the risk of slipping. Clean the fl oor imme-
diately using appropriate cleaning agents.
Batteries:
2x
Do not reuse!
Do not open!
Do not expose to fi re!
RECHARGE
Do not charge!
= Note, tip
You may download lubricant data sheets from our web site or ask your local supplier.
We accept no liability for any damages and malfunctions which are caused by inap-
propriate usage and inappropriate operations on or with the lubricator.
At the time of delivery, the lubrication system corresponds to the state of the art and,
as a basic principle, is considered safe to operate.
Because of constant product improvements, we reserve the right to make product
changes which do not alter the function of the product, without prior notice.
Protect the environment by recycling valuable raw material according to local
regulations.
This manual helps ensure safe working on and with the automatic lubrication system,
which is designed for use in machinery and equipment and which lubricates roller
and sliding bearings, chains, sliding guideways, open gears, etc. with oil / grease.
Upon delivery, make sure to check that the delivered goods correspond to your order.
No liability is accepted for subsequent claims of any defects.
If you have any questions or problems, please contact our customer service team or
your local supplier.
Protection cover
Drive (re-usable)
Battery (not re-usable)
Battery housing low temperature
(re-usable)
Filled LC (not refi llable)
Storage conditions
Operating temperature
Discharge period
Alkaline manganese
Shaft orientation
Oil fi lled
Airborne noise emission
Vibration test
LED
Display
SET button
Discharge amount
Pause time
Hold down SET button
Release SET button
In operation (blinking)
Empty LC
Installation / Exchange date
Plug
Oil-containing waste
Oil retaining valve
Battery disposal
A
B
C
1
C
2
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Properties
Components / Initial
assembly
Drive handling
3.1 Displays
3.2 Confi guration
3.3 Operating states
Installation
LC exchange
Troubleshooting
Error
Cause
Corrective action
Waste disposal
Drive 500 handling
8.1 Properties LC 500
8.2 Displays
8.3 Confi guration
Low temperature
-40 °C to +60 °C
9.1 Special properties
9.2 Battery housing low temperature
9.3 Disposal of lithium batteries
Markings
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
