4
Position the wall plate [A] at your desired height, level the wall
plate [A] and mark 2 pilot hole locations.
1/8”
(3.2mm)
2
(60mm)
5/16”
(8mm)
2 3/16”
(55mm)
Drill 2 pilot holes into concrete wall.
A
Knock 2 anchors [W-B] into drilled
holes with hammer.
Secure the wall plate [A] to concrete wall using lag screws
[W-A-1] and washers [W-A-2] by phillips screwdriver.
A
1
2. INSTALL THE TEMPERED GLASS
G
S-A
E
S-B
UP
UP
UP
UP
1/8 in(3mm)
W-A-1
W-A-2
Connect the connector [E] to glass shelf support [G] with bolts [S-A] and Allen key
[S-B] as shown in the Fig.2.1 and keep about 1/8in(3mm) spacing left between the
connector with glass shelf support as shown in the Fig. 2.2.
W-B
Fig.2.1
Fig.2.2
E
G
S-A
Note: Never drill into the mortar
between blocks
