Perle LINKSTREAM, Руководство по установке

Страница: 6 / 26

LINKSTREAM USER GUIDE
Page 6
There are also two recessed push buttons on the front
panel:
RSET This performs a 'warm start' to the system in
that it clears down all queues and restarts the
system with existing configuration parameters.
RSRT This button is used to perform a full 'cold start'
and is used in conjunction with RSET.
The rear panel of the unit provides for all connections to
the unit.
FRONT PANEL
BUTTON
GETTING TO KNOW YOUR LINKSTREAM SECTION 1.0
Connections are:
❑
Mains Power Inlet
110-240V socket outlet to be nearby and accessible.
❑
0 - 23
Up to 24 user channels, 8 on the base unit and 8
on each expansion card.
❑
LINK 0
Serial WAN link.
❑
LINK 1
Serial WAN link.
❑
ISDN
ISDN2e Terminal Adaptor
❑
10b5, 10b2, 10bT
Ethernet interfaces for the various types of
Ethernet connection.
See page 9 for optional upgrades.
This rear panel switch selects the serial link and ISDN
interface.
Select 'ISDN' for ISDN.
Select 'LINK' for serial link connector.
Figure 2
LINKSTREAM
rear panel
REAR PANEL
CONNECTIONS
REAR PANEL
SWITCH