Perle LINKSTREAM, Руководство по установке

Страница: 23 / 26

LINKSTREAM USER GUIDE
Page 23
SECTION 4.0 CONFIGURING YOUR LINKSTREAM
Node: Local Mon 01 Jan 199- 00:00
CONFIGURE SESSION PARAMETERS
==============================
Channel No: 0
Telnet Transparent
Internet Address: 0.0.0.0 Protocol Port Numbers: 1000 2000
Access: Remote Session Mode: Transparent
Default Port: 23
Maximum Sessions: 4 Idle Timeout: 0 TCP Window Size: 1024
Autocall Destination: None
Preferred Destination: None
Data Transfer Node Parameters:
Terminal Type: unknown
Session Echo Node: Telnet Remote
Accept: ?
ctrl<a> -Log off
ctrl<x> - Main Menu
ctrl<y> - Previous Menu ctrl<z> - Last Field
--------------------------------------------------------------------------------------------------------------------------------
SYSTEM MSG: Enter chan no. ( 0 to [max no. chans - 1] )
LOGON
MAIN MENU
You have now successfully set up your local
LINKSTREAM. Before configuring the remote unit,
perform a system reset. This screen is entered to reboot
the system and requires a confirmation response.
LOGON
MAIN MENU
CONFIGURATION
SYSTEM RESET
Node: Local Mon 01 Jan 199- 00:00
SYSTEM RESET
============
Warm Start Node: . Confirm: .
ctrl<a> - Log Off ctrl<x> - Main Menu ctrl<y> - Previous Menu
------------------------------------------------------------------------------------------------------------------
SYSTEM MSG:
Each channel (0-23) to be configured as follows:
þ
Channel Number
Select channel number.
þ
Access
Select to Remote at local and set to Dedicated
at the remote end.
þ
Session Mode
Select Transparent at both local and remote.
þ
Autocall Destination
Enter a destination IP address. Set as 128.16.0.64
remote only.
Enter 'Y' to 'Accept:' to save displayed values.
CONFIGURATION
CHANNEL
CONFIGURATION
CHANNEL SESSION
PARAMETERS
The following parameters
must be defined