Perle 833IS, Руководство пользователя

Страница: 57 / 340

Chapter 3: Setting Up and Installing
Perle 833IS User Guide 41
Configuring the 833IS
Using the Manager
Refer to Section 2: "Configuring the 833IS" for detailed instructions on the
configuration process.
During this configuration process, you will:
■
Connect the Manager with the 833IS. See “Chapter 4: Using the Perle 833IS
Manager” .
■
Download the 833IS System software.
■
Set up the parameters for the interfaces on the cards installed in your system. See
“Chapter 6: Configuring the interfaces” .
■
Configure the network parameters for the protocols that your remote users will
use. See “Chapter 7: Configuring the Protocols” .
■
Set up the type of security that you wish to use to control remote access to your
network. See “Security” on page 169.
■
If you select "User Database" as your method of security, add users to the 833IS's
user database and set their access rights and capabilities. See “Chapter 8:
Configuring the User Database” on page 135.
■
Download the configuration to the 833IS. See “Downloading” on page 69. This
download will cause the Front Panel operation to change from Factory mode to
Normal mode.
In order to minimize the amount of configuration, defaults are provided that work for
most installations. The 833IS Manager also provides a great deal of flexibility to
meet the needs of special network requirements. However, most sites will not
require these advanced capabilities.
You can take advantage of the Group features to allocate different lines and services
to different groups of people. (See “Group Settings” on page 182). However, to
simplify installation, it is recommended that Groups be set up after basic installation
is complete and operation verified.
Using Cisco Mode For information on Cisco mode installation and operation, please refer to "Appendix
5: Cisco Configuration Mode". This mode is intended only for advanced users
previously trained on the operation of Cisco equipment.
Even if you are planning to use the Cisco mode for day to day operations, you may
wish to use the Manager for initial configuration. The GUI Manager makes it very