Perle 833IS, Руководство пользователя

Страница: 158 / 340

Configure the Internal User Database
142 Perle 833IS User Guide
2.
Enter a time value in minutes.
Note that bridged protocols may generate data traffic even though the user may not
be performing any functions. This may cause the connection to remain open even
when the user is inactive.
Use caution when setting this option. A user that is connected to a network when this
timer expires will be disconnected, which may adversely affect the operation of
certain applications.
Connect Time
This feature will disconnect a dial in user after a preset time limit, regardless of
activity. The default is to allow the user Unlimited connect time.
To configure a time limit:
1.
Click the Maximum radio button.
2.
Enter a value for connect time in minutes.
This feature is can be used by remote IP or IPX dial in clients to save on connection
charges. With client virtual connect enabled, the client can drop the physical
connection, but the 833IS will keep the session active. The client can then reconnect
and the 833IS will reassign the same session, and client IP address.
The Inactivity Timeout and Connection timers affect the virtual connection in the
following manner:
■
Inactivity Timeout
If there is no data transfer on the link for the duration set in this timer, the client
session drops and the physical connection drops. Time in the virtual connection
state is included. If "disabled" is set for inactivity timeout, the session will be
released after 10 minutes in the virtual state. This is to prevent an unused session
from being tied up permanently.
■
Connect Time
The client will be disconnected and the session will be dropped after the time
limit set in this timer, regardless of activity. Time in the virtual connection state
is included.
If you are using Radius as your authentication server, you can configure the Radius
server to set the Inactivity Timeout and Connect Time.
To be effective, the dial in client should support virtual connect. It should have a
mode that: