Perle 833IS, Руководство пользователя

Страница: 160 / 340

Configure the Internal User Database
144 Perle 833IS User Guide
Protocols
Disable any Protocols that the user should not have access to by removing the check
in the check box. IP and IPX protocols are enabled by default. However, if the server
has any protocols disabled, then that protocol cannot be enabled for the User.
Compression
Enable Protocol compression for IP and IPX for a specific user. If enabled,
compression will be done on the protocol headers.
Filters
Disable Server Filters:
To override the server-assigned filters and use only the user-assigned filters, click
this box.
IP Filter:
To assign IP filters for the user, click this button to open the User Filter Assignment
window.
IPX Filter:
To assign IPX filters for the user, click this button to open the User Filter
Assignment window.
Addresses
User IP address:
A user can be assigned a specific IP address by checking this field. The address is
entered in dotted decimal format (for example xxx.xxx.xxx.xxx). The network
portion of this address must be the same as the network portion of the server's IP
address.
Fixed MAC Address:
The Fixed MAC Address field is used to assign a specific MAC address to a dial-up
user. When the user connects using a BCP or native NetBeui client, the MAC
address defined will be assigned to the user. If the MAC Address is not specified,
one will be taken from the pool defined on the server or it may be specified by the
dial-up client. If the user is on an Ethernet lan, the valid address range is
020000000000 - 02FFFFFFFF00. If the user is on a Token Ring lan, the valid
address range is 400000000000 - 40FFFFFFFF00.