SEBU8455
73
Maintenance Section
Engine - Clean
•
Adjustment
•
Lubrication
•
Other maintenance recommendations
Perform any maintenance for the driven equipment
which is recommended by the OEM.
i02568158
Engine - Clean
Personal injury or death can result from high volt-
age.
Moisture can create paths of electrical conductiv-
ity.
Make sure that the electrical system is OFF. Lock
out the starting controls and tag the controls “DO
NOT OPERATE”.
NOTICE
Accumulated grease and oil on an engine is a
fi
re haz-
ard. Keep the engine clean. Remove debris and
fl
uid
spills whenever a signi
fi
cant quantity accumulates on
the engine.
Periodic cleaning of the engine is recommended.
Steam cleaning the engine will remove accumulated
oil and grease. A clean engine provides the following
bene
fi
ts:
•
Easy detection of
fl
uid leaks
•
Maximum heat transfer characteristics
•
Ease of maintenance
Note:
Caution must be used in order to prevent
electrical components from being damaged by
excessive water when you clean the engine. Avoid
electrical components such as the alternator, the
starter, and the Electronic Control Module (ECM).
i04633632
Engine Air Cleaner
Element (Single Element) -
Inspect/Clean/Replace
g02795542
Illustration 45
Typical example
1.
Rotate fastener (1) counter clockwise and remove
end cover (2). Remove inner fastener (4) and
remove old element (5).
2.
Insure that all components are clean and free
from dirt. Do not allow dirt to enter the induction
system. Check all induction hoses.
3.
Install new element and install fastener (4).
Tighten fastener securely.
4.
Install end cover (2). Insure that valve (3) is
vertically down and tighten fastener (1) securely.