Perkins 403EA-11, Руководство по эксплуатации и обслуживанию, Страница: 93 / 114

Illustration 60 g03317856
(Y)
“
ADD
”
mark.
(X)
“
FULL
”
mark.
(A) Original oil level gauge
(B) Alternative oil level gauge
NOTICE
Perform this maintenance with the engine stopped.
Note:
Oil gauge (A) or oil gauge (B) may be installed
in the engine.
1.
Maintain the oil level between
“
ADD
”
mark (Y) and
“
FULL
”
mark (X) on oil level gauge (1). Do not fill
the crankcase above
“
FULL
”
mark (X).
NOTICE
Operating your engine when the oil level is above the
“
FULL
”
mark could cause your crankshaft to dip into
the oil. The air bubbles created from the crankshaft
dipping into the oil reduces the oil's lubricating char-
acteristics and could result in the loss of power.
2.
Remove the oil filler cap and add oil, if necessary.
Clean the oil filler cap. Install the oil filler cap.
i01907674
Engine Oil Sample - Obtain
The condition of the engine lubricating oil may be
checked at regular intervals as part of a preventive
maintenance program. Perkins include an oil
sampling valve as an option. The oil sampling valve
(if equipped) is included in order to regularly sample
the engine lubricating oil. The oil sampling valve is
positioned on the oil filter head or the oil sampling
valve is positioned on the cylinder block.
Perkins recommends using a sampling valve in order
to obtain oil samples. The quality and the consistency
of the samples are better when a sampling valve is
used. The location of the sampling valve allows oil
that is flowing under pressure to be obtained during
normal engine operation.
Obtain the Sample and the
Analysis
Hot oil and hot components can cause personal
injury. Do not allow hot oil or hot components to
contact the skin.
In order to help obtain the most accurate analysis,
record the following information before an oil sample
is taken:
• The date of the sample
• Engine model
• Engine number
• Service hours on the engine
• The number of hours that have accumulated since
the last oil change
• The amount of oil that has been added since the
last oil change
Ensure that the container for the sample is clean and
dry. Also ensure that the container for the sample is
clearly labelled.
To ensure that the sample is representative of the oil
in the crankcase, obtain a warm, well mixed oil
sample.
To avoid contamination of the oil samples, the tools
and the supplies that are used for obtaining oil
samples must be clean.
M0132847 93
Maintenance Section
Engine Oil Sample - Obtain