Perkins 4016-61 TRG Скачать руководство пользователя | Manualshive

Страница: 48 / 92

background image

Note:

Metallic fuel additives can cause fuel system/

injector fouling and after treatment device fouling.
Perkins discourages the use of metallic fuel additives
in most applications. Metallic fuel additives should
only be used in applications, where their use is
specifically recommended by Perkins.

Note:

Diesel fuel additives or conditioners may not

improve markedly poor diesel fuel properties enough
to make them acceptable for use.

Note:

For best results, your fuel supplier should treat

the fuel when additives are needed.

Diesel Fuel Conditioner

In case a fuel conditioner is needed to improve
certain fuel properties, consult with your fuel supplier
or with a reputable provider.

Perkins Diesel Fuel System
Cleaner

Note:

Perkins Diesel Fuel System Cleaner, part

number

T400012

, is the only fuel system cleaner

available to the end user that is tested and approved
by Perkins for use in Perkins diesel engines.

Perkins Diesel Fuel System Cleaner is a proven high-
performance detergent product specifically designed
for cleaning deposits that form in the fuel system.
Deposits in the fuel system reduce system
performance and can increase fuel consumption.
Perkins Diesel Fuel System Cleaner addresses the
deposits formed due to the use of degraded diesel
fuel, poor quality diesel fuel, and diesel fuel
containing high quantities of high molecular weight
compounds. Perkins Diesel Fuel System Cleaner
addresses deposits formed due to the use of
biodiesel, biodiesel blends, and biodiesel that does

not meet the appropriate quality specifications.
Continued use of Perkins Diesel Fuel System
Cleaner is proven to inhibit the growth of new
deposits.

Perkins Diesel Fuel System Cleaner can be added
directly to diesel fuel, biodiesel, or biodiesel blends.
Perkins Diesel Fuel System Cleaner is a United
States Environmental Protection Agency registered
fuel additive that can be used with Ultra Low Sulfur

Diesel Fuel. In addition this cleaner is appropriate for
use with other ultra low, low, and higher sulfur diesel
fuels around the world.

Perkins Diesel Fuel System Cleaner is a proven high-
performance cleaner that is designed to perform the
following:

• Clean performance-robbing fuel system deposits

• Restore fuel economy losses resulting from

injector deposits

• Restore power losses resulting from injector

deposits

• Eliminate visible black exhaust smoke resulting

from injector deposits

• Prevent the formation of new fuel-related deposits

48

SEBU8604-02

Maintenance Section
Fuel Specifications

«
...
46
47
48
49
50
...
»

Содержание 4016-61 TRG





























































































Отзывы:

Нет отзывов

Похожие инструкции для 4016-61 TRG

Бренд: O.S. engine Страницы: 21

Бренд: V2 Страницы: 20

Бренд: Garmin Страницы: 14

Бренд: Navistar Страницы: 197

Бренд: Zimmer Страницы: 40

695D/925 Series

Бренд: Wisco Industries Страницы: 6

High-Power RMS-PLUS 54/1706

Бренд: Aerotech Страницы: 2

RMS 98/10240 BLACK MAX

Бренд: Aerotech Страницы: 2

Бренд: Lombardini Страницы: 88

Бренд: Volvo Penta Страницы: 40

Бренд: Volvo Penta Страницы: 48

Бренд: Volvo Penta Страницы: 76

Бренд: Volvo Penta Страницы: 124

Бренд: Volvo Penta Страницы: 140

Бренд: DUROMAX Страницы: 70

Бренд: YS Performance Страницы: 2

Бренд: Jabiru Страницы: 56

Бренд: Honda Страницы: 60

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды