Illustration 46
g01242332
When the air filter element requires replacement, the
center section of the service indicator (1) is red.
Service Indicator Reset
Illustration 47
g01242328
Once the service indicator has been triggered and
when the air filter element has been replaced, the
service indicator must be reset. In order to reset the
service indicator (1), press the button (2).
If the service indicator does not reset easily, the
service indicator should be replaced.
Note:
The service indicator may need to be replaced
frequently in environments that are severely dusty.
i07214352
Engine
Crankcase
Breather
-
Clean
The
breather
has
no
filter
element
that
needs
to
be
replaced.
The
breather
will
only
require
cleaning.
Illustration 48
g06009120
Typical example
1.
Isolate the electrical supply to the engine.
2.
Ensure that the outer casing of the breather is
clean and free from dirt. Remove the bolts (2) and
remove cover (1) from breather body (5).
3.
Remove O ring seal (3) and discard.
4.
Remove breather baffle (4) and clean the breather
baffle, cover, and breather body.
5.
Install cleaned breather baffle (4) into clean
breather body (5). Install new O ring seal (3) onto
cover (1) and install cover to breather body (5).
6.
Install bolts (1) and tighten bolts to a torque of
50 N·m (36 lb ft). Install power to the engine.
i02415257
Engine
Mounts
-
Inspect
Misalignment
of
the
engine
and
the
driven
equipment
will
cause
extensive
damage.
Excessive
vibration
can
lead
to
misalignment.
Excessive
vibration
of
the
engine
and
the
driven
equipment
can
be
caused
by
the
following
conditions:
• Improper mounting
• Loose bolts
• Deterioration of the isolators
Ensure that the mounting bolts are tightened to the
correct torque.
M0088207
65