SEBU8337
75
Maintenance Section
Fuel System Secondary Filter - Replace
g01394652
Illustration 45
Typical example
2.
Remove the drain plug (1). Allow the fuel to drain
from the
fi
lter. Check the O ring seal on the drain
plug for damage . If necessary, replace the O ring.
3.
Remove the secondary
fi
lter bowl (2) from the
assembly. Remove the
fi
lter element and the O
ring seal. Discard both items. Clean the
fi
lter bowl.
g01394660
Illustration 46
Typical example
Note:
The
fi
lter element for the secondary fuel
fi
lter is
different from the element for the primary fuel
fi
lter.
Ensure that the correct elements are installed into
the fuel system.
4.
Ensure that the insert (4) is the same shape as
the tab (3).
5.
Align the insert to the tab and install the element
into the
fi
lter bowl.
g01394685
Illustration 47
6.
Install a new O ring seal (5). Lubricate the threads
on the bowl assembly with
CV60889
Special
Lubricant.
7.
Install the bowl assembly. Tighten the bowl
assembly to a torque of 80 N·m (59 lb ft). Install
the drain plug and tighten to the following torque
1.2 N·m (11 lb in).
8.
Turn the valves for the fuel lines (if equipped) to
the ON position. Prime the fuel system. Refer to
the Operation and Maintenance Manual, “Fuel
System - Prime” for more information.
9.
Remove the split fuel and dispose of the fuel
safely.
10.
Operate the engine and check for fuel leaks.
