Perkins 1706EA-E93TA Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 140

Perkins 1706EA-E93TA Скачать руководство пользователя страница 8

Illustration 4

g06652206

Purge notice message

This notice should be located next to the battery
disconnect switch.

NOTICE

Do not turn the battery power disconnect switch off
until indicator lamp has turned off. If the switch is
turned off when the light is illuminated then the DEF
system will not purge and DEF could freeze and
cause damage to the pump and lines.

Illustration 5

g01206181

Typical example

This message is on the top of the radiator guard on
the right-hand side of the engine.

This message indicates that personnel should not
use the radiator guard as a step.

Illustration 6

g06652233

Typical example

This message is on the top of the radiator near the
cooling system filler cap. Refer to Operation and
Maintenance Manual for more information.

i08312718

General

Hazard

Information

Illustration 7

g00104545

Attach a

“

Do Not Operate

”

warning tag or a similar

warning tag to the start switch or to the controls
before the engine is serviced or before the engine is
repaired. Attach the warning tags to the engine and
to each operator control station. When appropriate,
disconnect the starting controls.

Do not allow unauthorized personnel on the engine,
or around the engine when the engine is being
serviced.

• Tampering with the engine installation or

tampering with the OEM supplied wiring can be
dangerous. Personal injury, death and/or engine
damage could result.

8

M0087475-06

Safety Section
General Hazard Information

«
...
6
7
8
9
10
...
»

Содержание 1706EA-E93TA













































































































































Отзывы:

Нет отзывов