Perkins 1106C-70TA Скачать руководство пользователя страница 75 | Manualshive

Страница: 75 / 104

background image

i05330512

Coolant Extender (ELC) - Add

In order for Perkins ELC to achieve 12000 hours an

extender must be added at 6000 hours. For a suitable

extender, contact your Perkins dealer or Perkins
distributor.

i04913523

Coolant Level - Check

Pressurized System: Hot coolant can cause seri-
ous burns. To open the cooling system filler cap,
stop the engine and wait until the cooling system
components are cool. Loosen the cooling system
pressure cap slowly in order to relieve the
pressure.

Check the coolant level when the engine is stopped
and cool.

NOTICE

When any servicing or repair of the engine cooling
system is performed, the procedure must be per-
formed with the engine on level ground. This proce-
dure will allow you to check accurately the coolant
level. This procedure will also help in avoiding the risk
of introducing an air lock into the coolant system.

1.

Remove the cooling system filler cap slowly in

order to relieve pressure.

2.

Maintain the coolant level at the maximum mark

that is correct for your application. If the engine is
equipped with a sight glass, maintain the coolant
level to the correct level in the sight glass.

Illustration 39

g02590196

Typical filler cap gaskets

3.

Clean the cooling system filler cap and check the

condition of the filler cap gaskets. Replace the
cooling system filler cap if the filler cap gaskets are
damaged. Reinstall the cooling system filler cap.

4.

Inspect the cooling system for leaks.

i03644948

Cooling System Supplemental
Coolant Additive (SCA) - Test/
Add

Cooling system coolant additive contains alkali.
To help prevent personal injury, avoid contact
with the skin and the eyes. Do not drink cooling
system coolant additive.

Test for SCA Concentration

Heavy-Duty Coolant/Antifreeze and SCA

NOTICE

Do not exceed the recommended six percent supple-
mental coolant additive concentration.

Use a Coolant Conditioner Test Kit in order to check

the concentration of the SCA.

SEBU8731

75

Maintenance Recommendations

Coolant Extender (ELC) - Add

«
...
73
74
75
76
77
...
»

Содержание 1106C-70TA









































































































Отзывы:

Нет отзывов

Похожие инструкции для 1106C-70TA

Бренд: YOODA Страницы: 7

Бренд: Jabiru Страницы: 116

Бренд: Kärcher Страницы: 224

Бренд: Stuart Turner Страницы: 20

Бренд: SCREENLINE Страницы: 4

Бренд: Dietz Страницы: 10

Бренд: Dietz Страницы: 11

Бренд: Lombardini Страницы: 57

Бренд: Lombardini Страницы: 94

130000 950 Series

Бренд: Briggs & Stratton Страницы: 100

Бренд: Toyan Engine Страницы: 36

Бренд: Mitsubishi Страницы: 219

Бренд: LEHR Страницы: 30

Бренд: CAB Страницы: 16

Бренд: O.S. engine Страницы: 18

Бренд: Akribis Страницы: 86

Бренд: Nanni Страницы: 12

Бренд: KAMA Страницы: 25

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды