Perkins 1104D-E44T, Руководство по эксплуатации и обслуживанию, Страница: 86 / 106

Illustration 54 g03499937
Typical example
1. Remove the drain plug (1) in order to allow the oil
to drain.
a. If the engine as an oil drain valve (3) installed,
install a suitable flexible hose onto the valve
(4). Turn the handle (2) counter clockwise and
allow the oil to drain.
b. When the oil has drained, turn the handle
clockwise and tighten securely. Remove the
flexible hose.
Illustration 55 g03350650
Typical example
2. Remove O ring seal (5) and install new O ring seal.
3. Install drain plug and tighten drain plug to a torque
of 34 N·m (25 lb ft).
Replace the Oil Filter
NOTICE
Perkins oil filters are manufactured to Perkins specifi-
cations. Use of an oil filter that is not recommended
by Perkins could result in severe damage to the en-
gine bearings, crankshaft, etc., as a result of the larg-
er waste particles from unfiltered oil entering the
engine lubricating system. Only use oil filters recom-
mended by Perkins.
1. Remove the oil filter with a suitable tool.
Note: The following actions can be carried out as part
of the preventive maintenance program.
2. Cut the oil filter open with a suitable tool. Break
apart the pleats and inspect the oil filter for metal
debris. An excessive amount of metal debris in the
oil filter may indicate early wear or a pending
failure.
Use a magnet to differentiate between the ferrous
metals and the nonferrous metals that are found in
the oil filter element. Ferrous metals may indicate
wear on the steel and cast iron parts of the engine.
Nonferrous metals may indicate wear on the
aluminum parts, brass parts or bronze parts of the
engine. Parts that may be affected include the
following items: main bearings, rod bearings and
turbocharger bearings.
Due to normal wear and friction, it is not
uncommon to find small amounts of debris in the
oil filter.
Illustration 56 g03499938
Typical example
86 SEBU9066
Maintenance Recommendations
Engine Oil and Filter - Change