PerkinElmer Spectrum Two HATR Скачать руководство пользователя страница 2

Страница: 2 / 26

Release History

Part Number Release

Publication Date

L1050232

March 2011

Any comments about the documentation for this product should be addressed to:

User Assistance

PerkinElmer Ltd

Chalfont Road

Seer Green

Beaconsfield

Bucks HP9 2FX

United Kingdom

Or emailed to: [email protected]

Notices

The information contained in this document is subject to change without notice.

Except as specifically set forth in its terms and conditions of sale, PerkinElmer makes no

warranty of any kind with regard to this document, including, but not limited to, the

implied warranties of merchantability and fitness for a particular purpose.

PerkinElmer shall not be liable for errors contained herein for incidental consequential damages in

connection with furnishing, performance or use of this material.

Copyright Information

This document contains proprietary information that is protected by copyright.

All rights are reserved. No part of this publication may be reproduced in any form whatsoever or

translated into any language without the prior, written permission of PerkinElmer, Inc.

Produced in the UK.

Trademarks

Registered names, trademarks, etc. used in this document, even when not specifically marked as such,

are protected by law.

PerkinElmer is a registered trademark of PerkinElmer, Inc.

Spectrum and Spectrum Two are trademarks of PerkinElmer, Inc.

Содержание Spectrum Two HATR



























Результаты поиска

Содержание Spectrum Two HATR

Отзывы:

Бренды по названию

Популярные бренды

PerkinElmer Spectrum Two HATR, Руководство пользователя

Результаты поиска

Содержание Spectrum Two HATR

Отзывы:

Бренды по названию

Популярные бренды