PerkinElmer Photovac 2020, Руководство пользователя

Страница: 118 / 190

2020 Software Manual
116
low continuous charge rate indefinitely so there is no danger of over-
charging.
When the LED, on the bottom of 2020, is red, the battery is
charging. When the LED turns green, the battery is fully charged.
NOTE: Leaving 2020 for more than 3 months without turning it on may
result in the loss of recorded data and setup parameters. If
2020 is not used for long periods, turn the instrument on for a
few hours every month to avoid loss of data.
Maintenance of the UV Lamp
Removing and Replacing the UV Lamp
NOTE: Do not remove or replace the UV lamp in a hazardous location.
To remove the UV lamp from your instrument:
1. Ensure the instrument is turned off.
WARNING
You must turn the instrument off before removing the lamp cover.
2. Use the 2020 multi-tool to remove the lamp housing
cover.
3. Tilt 2020 slightly and remove the UV lamp.
WARNING
Do not touch the wire grid inside the detector cell. Any dust or dirt in
the detector cell can be blown out with a gentle jet of compressed air.
Do not insert any object, other than the UV lamp, into the lampholder.