6
N1015158 OPERATING MANUAL
2.3.5. External Control Possibilities
• USB as standard.
2.3.6. Dimensions
Width
: 170 mm
Height
: 280 mm
Depth
: 430 mm
Weight
: 6 kg
2.3.7. Electrical data
• Mains supply: 115/120 V or 220/240 V t 10% (factory setting 220/240 V)
• Frequency: 50/60 Hz
• Power: 120 VA
• CE marked
2.3.8. Description of Symbols
Caution (Refer to accompanying documents).
Symbol identifying the use of substances dangerous for health and environment.
For these substances reference must be made to the laws and standards in force
in the laboratory where this instrument is used. If using flammable or explosive
substances take the necessary precautions.
Note:
Connection to the protective ground is ensured through the power supply cable
which has to be in accordance with CEE 7 (IEC 23-5).
2.3.9. Environmental conditions
Performance and safety of the N1015158 are guaranteed at all times if it is operated under the
following environmental conditions:
•
Installation category II with smaller transient over voltages (standard IEC 664)
•
Pollution degree 2 (standard IEC EN 61010-1)
•
The instrument is designed for internal use and altitudes below 2000 m
•
Mains voltage fluctuations must not exceed t10% of the nominal voltage
•
In locations where the relative humidity is lower than 80%
•
In locations free from dust or vapours of solvents and acids
