PerkinElmer IVIS Lumina III Series Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 91

background image

3

Warnings

Electrical Safety

Eye Safety and Burn Hazard

Mechanical Safety

Chemical and Biological Safety

Panels, Cover, and Modules

3.1 Electrical Safety

3.2 X-Ray Safety

VOLTAGE!

DO NOT attempt to service the IVIS Lumina XRMS Series III yourself.

Although there are no voltages in excess of 24V inside the imaging chamber, local
line voltages (110VAC or 230VAC) are present in the lower electronics tray. The
light source module may be user-serviced for line fuse and lamp replacement
only. There are no other user serviceable electrical parts in the light source
module with the exception of the line fuse. See

Fuse Replacement

instructions. Contact PerkinElmer Technical Support for other electrical service
needs (see

!

WARNING!

If necessary, wipe exterior surfaces of the light source module with a

soft cloth. DO NOT use fluids to clean the exterior of the module. Do not allow
fluids of any kind to enter the light source module under any circumstances. See

Cleaning the IVIS Lumina XRMS Series III

for instructions.

!

WARNING!

When the power is on, DO NOT disconnect or reattach the electrical

control cable that connects the fluorescence equipment (excitation filter
assembly) to the light source module and the IVIS Lumina XRMS Series III
(electronics tray). See System Components, page 45 for photographs of these
components. Disconnecting or reconnecting the control cable when the system
has electrical power will damage the system. Always turn off the switch on the
front panel of the light source module and the rear-mounted ON/OFF switch on
the IVIS Lumina XRMS Series III before you connect or disconnect any of these
cable connections.

!

WARNING!

This equipment produces X-rays when energized.

!

WARNING!

The IVIS Lumina XRMS Series III should be operated only by

personnel who have been trained in radiation safety and the operation
and safety instructions contained in this manual. PerkinElmer also
recommends that personnel who operate the equipment, or are close
proximity to the equipment, use a radiation film badge or other type of
appropriate personal dosimeter.

«
...
12
13
14
15
16
...
»

Содержание IVIS Lumina III Series




























































































Отзывы:

Нет отзывов

Похожие инструкции для IVIS Lumina III Series

Бренд: Navman Страницы: 17

Бренд: Haigh Страницы: 60

Бренд: Handler Страницы: 25

Бренд: Parker Research Corp Страницы: 4

Бренд: Eastwood Страницы: 20

Бренд: Daihan Scientific Страницы: 43

Бренд: ParaBody Страницы: 3

Бренд: Hach Страницы: 52

Бренд: hager Страницы: 2

Бренд: SCHUNK Страницы: 2

Бренд: BRAND Страницы: 21

Бренд: Milestone Страницы: 40

Firefly 808 Universal

Бренд: Phonic Страницы: 27

Бренд: TEUCER Страницы: 4

Phastite PH-8-HANDTOOL

Бренд: Parker Страницы: 10

Cooper Lightig All-Pro WL2540LP

Бренд: Eaton Страницы: 4

N3242-1 Heron Lift E

Бренд: Wealden Rehab Страницы: 11

Бренд: Lanta Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды