PerkinElmer Caliper IVIS Spectrum Скачать руководство пользователя страница 57

Страница: 57 / 74

IVIS

Spectrum Hardware Manual

Care & Maintenance

Cleaning the IVIS Spectrum  . . . . . . . . . .  .  .  .  . . . . . . . . . .   51
Cleaning the Lens Protection Window   . . . .  .  .  .  . . . . . . . . . .   52
Changing the Emission Filters Used in Fluorescence Imaging   . . . .   53
Moving the System .  .  .  .  . . . . . . . . . . .  .  .  .  . . . . . . . . . .   55

9.1 Cleaning the IVIS Spectrum

If necessary, wipe the exterior surface of the IVIS Spectrum console with a soft

cloth. If the system requires more aggressive cleaning or sterilization, contact

IVIS Imaging Systems Technology Support.

DANGER

DANGER!

DO NOT use sprays or fluids to clean the exterior or interior of the

module. Do not allow fluids of any kind to penetrate the electronics cabinet

under any circumstances. Sprays and liquids that come into contact with the

IVIS Spectrum may result in damage to the system or electrocution.

WARNING

WARNING!

Do not use fluids or moistened towels to clean any part of the

system console where electrical or fiber optic cables make connections. Do

not use fluids of any kind near the filter wheel assembly. Turn off the electrical

power to the IVIS Spectrum by turning the front panel toggle switch to standby

and turning off the rear panel switch before engaging in cleaning operations

that use fluids. The imaging chamber power switch is located on the rear of

the system console.

Approved Cleaning
Solutions

The compounds shown in

Table 9.1

do not damage the internal finish of the

IVIS

Spectrum imaging chamber and are suitable as cleaners, if required. Do

not use any solution not included in this list. In particular, avoid strong bases,

bleach, or acids that may potentially damage the unit and compromise its

operation.

IMPORTANT

ALERT!

Do not spray cleaning solutions in the imaging chamber.

Содержание Caliper IVIS Spectrum











































































Результаты поиска

Содержание Caliper IVIS Spectrum

Отзывы:

Бренды по названию

Популярные бренды

PerkinElmer Caliper IVIS Spectrum, Руководство по оборудованию

Результаты поиска

Содержание Caliper IVIS Spectrum

Отзывы:

Бренды по названию

Популярные бренды