➏
Advertise Local subnet.
By default, a Sequence Reducer’s local subnet is not advertised to the other Peribit devices in the community. As a result,
data destined for this subnet is not reduced — even if there is a Peribit device in the path.
•
If you want other Peribit devices to reduce data destined for this subnet, select the
Advertise
checkbox.
•
If you choose not to advertise the local subnet, you should review the Reduction Subnets page of the SRS Web console
after completing the Quick Setup.
•
In the Device name field, you can assign a name for the Sequence Reducer.
•
Click
Next
to continue.
❼
Enter a license key.
Each Peribit Sequence Reducer requires a unique license key for operation. If the serial number is not shown, you can find
the serial number on the back of the device, and then manually enter it in the Serial Number field.
If you have purchased the SR-15 and have the serial number, you can obtain a permanent license key for the device through
Peribit’s Online License Service. The License Key server is accessible by clicking
Online Service
or by calling Peribit Support
at 1-866-737-4248 (or 408-330-5600).
•
Enter the license key for the Sequence Reducer in the License key field.
•
Click
Next
to continue.
❽
Change Administrator password.
•
Enter a new Administrator password in the New password and Verify new password fields, and then click
Finish
.
NOTE:
If you deselect the “automatic save” option, configuration settings will be reset upon a power cycle of the Sequence
Reducer.
Where to go next:
Initial configuration is complete and you are now ready to configure policy settings for the Sequence Reducer. Refer to the
Sequence Reducer/Sequence Mirror Operator’s Guide, which is located on the Peribit Documentation/Utilities CD. For addi-
tional product support information, visit our Web site at
http://www.peribit.com/support
.
SR-15
QUICK START
