Pergola kits USA PREMIUM VINYL PAVILION, Инструкция по сборке

Страница: 11 / 36

Anchor each rafter to the
plate on the marked “X”s
using three 3 1/2” screws,
staying flush with the vertical
line keeping 1/4-1/2" away
from the edge of the plate.
3X
Measure from the top of the
jack rafter to the side of the
side rafter. Repeat the mea-
surement on the lower end of
the jack rafters before fasten-
ing to ensure equal distance
at top and bottom.
Jack rafters will only fit prop-
erly on left or right side based
on upper bevel angle. Fasten
correct jack rafter into the hip
rafter with two 2 1/2” screws
staying 1/4-1/2” in on the edge
of the plate.
Fasten two ‘A23 Simpson’
brackets with 1 1/2” screws
on either side of each corner
hip rafter and one ‘A23 Simp-
son’ bracket at each side
rafter and jack rafter.
11
33
32
35
34