14
OPERATION
WARNING:
In order to reduce the risk of injury, wear safety goggles or glass-
es with side shields.
WARNING:
Before each use, check that the blade is free of cracks, loose
teeth, missing teeth, or any other damage. Do not use if damage is observed or
suspected.
WARNING
: Always wait for the blade to stop completely, and unplug the tool
before changing accessories or making adjustment.
Moving the Miter Saw
WARNING
: Before lifting or moving the Miter Saw, the Miter Saw must be OFF
and disconnected from the power supply.
Lift the Miter Saw only when the saw is OFF, the plug is removed from the
power-supply outlet, and the saw head is locked in the “down” position.
To avoid damage,
never
carry the Miter Saw by the cutting handle.
Always
carry the saw by the base.
Mounting the Miter Saw
To prevent the tool from sliding, falling, or tipping during operation, the Miter
Saw can be mounted to a supporting surface, such as a level, sturdy worktable
or bench. Position the Miter Saw and the workbench in such a way as to allow
adequate room for crosscutting long workpiece.
Turn the Miter Saw OFF and disconnect it from the power supply.
To mount the Miter Saw, insert fasteners through the four holes in the base of
the Miter Saw, and use the fasteners to secure the saw to the table or bench.
Selecting the Desired Angle
Follow the steps described in “Adjusting the miter” and “Adjusting the bevel”
WARNING:
The throat plate (see Fig. 1, #12) is factory-cut only for a 0º bevel
cut; the first cut made with the tool in the 45° bevel position will create a slot on
the throat plate.
WARNING:
Always make sure the spindle-lock button is released so that the
blade will rotate freely.
WARNING:
Make sure the stop latch is loose, and that the saw head moves
up and down freely. Ensure that all clamps and locks are tight and in place, and
that there is no excessive movement of Miter-Saw parts.
Selecting a workpiece
