manualshive.com logo in svg

Performance Motion Devices PR8358120, Руководство пользователя

Поделиться
Скачать
Performance Motion Devices PR8358120 Скачать руководство пользователя страница 12

Installation

12

Prodigy/CME PC/104 User’s Guide

1

The C-Motion Engine development tools are described in the 

C-Motion Development Tools Manual.

1.3.4

VB Motion

VB-Motion provides a complete set of methods and properties for developing applications in Visual Basic using a 
dynamically loaded library (DLL) containing PMD library software. The DLL may also be used from any language 
capable of calling C language DLL procedures, but no special software support is provided.

VB-Motion includes the following features:

• Magellan axis virtualization

• Ability to communicate to multiple PMD motion cards or Modules

• Ability to communicate via PCI bus, PC/104 bus, serial, CANbus, or Ethernet

• Provided as a single DLL and Visual Basic .NET source code for easy porting onto various PC 

environments

VB Motion is documented in the 

Prodigy/CME Programmer’s Reference

.

1.4

Accessory Products

The Prodigy/CME PC/104 cards can be enhanced with the addition of any or all of the hardware accessory products 
described in the following table.

Component Part 

Number

Description

PW-2001-KIT-01.R

Power supply & cable set. This is a US Domestic & International wall adapter power supply 
and associated cable that plugs in the Prodigy/CME PC/104 card and provides power 
through its Power Connector. If the card receives power through the PC/104 bus then 
this accessory is not necessary.

Cable-2003-01.R

50-pin ribbon cable. This 3 foot long cable connects the right and left motion connectors 
(GP Connector) to identical connectors on a receiving card such as the IM-1000 breakout 
interconnect card, and it connects the Option Connector to an identical connector on a 
receiving card such as the IM-600 breakout interconnect card.

Cable-4301-01.R

10-pin serial header cable. This 1 foot cable plugs into the card’s 10-pin serial header con-
nector and provides a single female DB-9 output with dual serial signals. It can be con-
nected to Cable-4355-01.R to provide dual DB-9 serial outputs.

Cable-4355-01.R

Dual serial cable. This 5 foot long “Y” cable connects to the DB-9 output of Cable-4301-
01.R and provides two female DB-9 connectors suitable for connection to a PC serial port 
or USB-to-serial converter.

Cable-4701-01.R

CANbus header to RJ45 connector. This 1 foot cable plugs into the card’s 8-pin CANbus 
header connector and provides an RJ45 output.

Cable-RJ45-02-R

CANbus and Ethernet cable. This 2 meter cable connects to the card’s CANbus or Ether-
net outputs. It has RJ45 connectors on both ends.

TRM-RJ45-02.R

CANbus terminator. This is an RJ45 terminator that may be used to electrically terminate 
a CANbus network string.

Adapt-RJ45T-01.R

CANbus splitter. This Y configuration splitter duplicates the CANbus RJ45 connections 
into two identical RJ45 connectors, making it easy to connect the card in a daisy chain con-
figuration.

Cable-4505-01.R

Ethernet header to RJ45 cable. This 5 foot cable plugs into the card’s 10-pin Ethernet 
header connector and provides an RJ45 output.

Cable-4371-01.R

20-pin ribbon cable. This 3 foot long cable connects the Pulse & Direction connector to an 
identical connector on a receiving card such as on the IM-600 breakout interconnect card.

DC-1000

Parallel encoder input adaptor. This daughter card module allows parallel-word and other 
encoders which use the SSI interface format to be directly connected.

Содержание PR8358120








































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды