Perform Better PB EXTREME 6453, Руководство по сборке

Страница: 4 / 20

page4
Safety Instructions
Half Rack Safety Information and General Exercise
Guidelines Safety Information
Read the Half Rack Owner's Manual carefully before assembling, servicing or using the Half
Rack.
! WARNING: Serious injury or death could occur if these
safety precautions are not observed:
1. Do not use the Half Rack in any way other than designed or intended by the
manufacturer. It is imperative that the Half Rack as well as any other PERFORM BETTER
STRENGTH equipment is used properly to avoid injury.
2. Keep hands, feet, head, limbs, fingers and hair clear at all times from moving parts to
avoid injury. Use appropriate positioning, speed and controlled movements.
3. DO NOT use any equipment that is damaged and or has worn or broken parts. Use only
replacement parts supplied by PERFORM BETTER.
4. DO NOT wear loose or dangling clothing while using the PERFORM BETTER equipment.
Keep away from all moving parts.
5. Obtain a medical exam prior to beginning an exercise program.
6. If at any time during exercise you feel faint, dizzy or experience pain, stop and consult
your physician.
7. Children must not be allowed near these machines. Teenagers must be supervised.
8. DO NOT attempt to fix a broken or jammed machine. Contact appropriate staff of Perform
Better Service.
9. Use the machine only for the intended use. Obtain instruction and DO NOT modify the
machines.
10. Load plates evenly and carefully to avoid tipping equipment and possible crushing
injuries. DO NOT exceed maximum load of 1200 lbs (545.5 kgs).
11. ALWAYS USE safety stops as directed DO NOT use if guards are missing or damaged.
12. ALWAYS position safety stops as outlined on the user placard descriptions for each
movement.
13. USE A SPOTTER for all activities.
14. MAINTAIN LABELS AND NAMEPLATES: Do not remove labels for any reason. They
contain important information. If unreadable or missing, contact PERFORM BETTER for a
replacement.
15. SECURING EQUIPMENT: All PERFORM BETTER equipment MUST be secured to the
floor to stabilize and eliminate rocking or tipping over. This must be performed by a licensed