PerfecTron INS8143A Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 52

PerfecTron INS8143A Скачать руководство пользователя страница 23

INS8143A

industrial

ATX

MB

23

(3) Serial-ATAII Port connector: SATA1~SATA4 Port

This connector supports the provided Serial ATA3 hard drive cable to
connecting the motherboard with SATA2 hard drive.

Pin No.

Defnition

1 GND

2 TXP

3 TXN

4 GND

5 RXN

6 RXP

7 GND

(4) Primary IDE Connector (40-pin block): IDE

This connector supports the provided IDE hard disk ribbon cable. After
connecting the single plug end to motherboard, connect the two plugs at
other end to your hard drive(s). If you install two hard drives, the second
drive must be configured to Slave mode by setting its jumpers accordingly.
Please refer to the documentation of your hard drive for the jumper
settings.



Two hard drives can be connected to each connector. The first hard
drive is referred to as the

Master

and the second hard drive is referred

to as the

Slave

.



For performance issues, it is strongly suggested that a CD-ROM or
DVD-ROM drive is not installed on the same IDE channel as a hard drive.
Otherwise, the system performance on this channel may drop.

IDE Connector

Pin 1

IDE1

3-2-3 Header Pin Definition

(1) Line-Out/MIC Header for Front Panel (9-pin): FP_AUDIO

This header is connected to the Front Panel Line-out or MIC connector
with cable.

«
...
21
22
23
24
25
...
»

Содержание INS8143A





















































Отзывы:

Нет отзывов