background image

3

 CONTROLS

1.  LCD display
2.  VOLUME/TONE knob
3.  TUNING / SEEK knob

4.  SD SLOT
5.  USB SOCKET
6.  PRESET 2 /
7.  PRESET 1 / FOLDER -
8. ON/OFF
9. SOURCE
10. LOUDNESS

11.  PRESET 3 / REWIND
12.  PRESET 4 / FAST FORWARD
13.  PRESET 5 / PLAY / PAUSE
14. MENU
15. INFO
16.  BLUETOOTH LED
17. SPEAKER

4

  

IMPORTANT SAFETY INSTRUCTIONS

1.  Read these instructions.

2.  Keep these instructions.

3.  Heed all warnings.

4.  Follow all instructions.

5.  Clean only with dry cloth.

6.  Do not block any ventilation openings. Install in accordance with the instructions.

7.  Do not install near any heat sources such as radiators, heat registers, stoves or  

 

other apparatus (including amplifiers) that produce heat.

8.  Do not defect the safety purpose of the polarized or grounding – type plug. A   

 

polarized plug has two blades with one wider than the other. A grounding type  

 

plug has two blades and a third grounding prong. The wide blade or the third prong  

 

is provided for your safety. If the provided plug does not fit into your outlet, consult  

 

an electrician for replacement of the obsolete outlet.

9.  Protect the power cord from being walked on or pinched particularly at plug,   

 

convenience receptacles, and the point where they exit from the apparatus.

10.  Only use attachments/accessories specified by the manufacturer.

11.  Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer,  

 

or sold with the apparatus. When a cart is used, use caution when moving the cart/ 

 

apparatus combination to avoid injury from tip-over.

12.  Unplug this apparatus during lightning storms or when unused for long periods of  

 time.

13.  Refer all servicing to qualified service personnel. Servicing is required if the  

 

apparatus has been damaged in any, such as power-supply cord or plug is    

 

damaged, liquid has been spilled or objects have fallen into the apparatus, the  

 

apparatus has been exposed to rain or moisture, does not operate normally, or has  

 

been dropped.

14.  To reduce the risk of fire or electric shock, do not expose this appliance to rain or  

 moisture.

15.  Do not remove the cover; there are no user-serviceable parts inside.

16.  No naked flame sources shall be placed on the apparatus.

17.  For outdoors use, to avoid electric shock, use battery only during a raining day or  

 

the weather is wet. To prevent electric shock, if the radio has been exposed to rain  

 

or water, the power supply cord and plug must be completely dried before plugging  

 

into the mains socket outlet.

18.  The power plug should be close to the apparatus, and easy to be approached that  

 

during emergency, to disconnect the power from the apparatus, just unplug the  

 

power plug from the AC power slot.

19.  The marking information is located at the bottom of the apparatus.

20.  This apparatus is provided with protection against splashing water (IP65).

21.  In case of malfunction due to electrostatic discharge or fast transient (burst),   

 

remove and reconnect the power supply.  

1

2

3

7
8

6

9

10

12
13

11

16

17

14
15

4

5

GB

Содержание SLIM-3
















Отзывы: