21
SETTING THE ALARM
The alarm can only be set when the radio is in standby mode
. If no buttons are
pressed for 10 seconds, the radio will exit the alarm setup and the setting is cancelled.
Or press the MENU button during alarm setup, the radio will also return to standby mode
without saving the adjusted alarm settings.
Setting the alarm clock
1. Press the
MENU button
for about 3 seconds, the display shows “ALARM SET” and
the hour digits flash on the display.
2. Rotate the
TUNING/SEEK knob
to set the hour.
3. Press the
TUNING/SEEK knob
to confirm. The minute digits flash.
4. Rotate the
TUNING/SEEK knob
to set the minute.
5. Press the
TUNING/SEEK knob
to confirm.
6. The display will then show “ALARM SOURCE”. You may choose “BUZZER”, “DAB”,
“FM RADIO”, “USB” or “SD”. Rotate the
TUNING/SEEK
knob to select. If “DAB” is
selected, the last listened station will be played when the alarm fires.
7. Press the
TUNING/SEEK knob
to confirm.
8. The display will then show “VOL XX”. Rotate the
TUNING/SEEK knob
to change
the alarm volume.
9. Press the
TUNING/SEEK knob
button to confirm.
Note: When USB or SD has been set as alarm source, the radio will automatically start
repeat all play back during alarm period.
Note: If USB or SD has been set as alarm source and the related mass storage device
is not correctly inserted into the USB or SD socket, system will fire buzzer alarm when
the alarm is activated.
Switching on/ off the alarm
To switch the alarm on, press the
MENU button
briefly. The alarm icon will be shown
at the top left corner. To switch the alarm off, press the
MENU button
briefly again. The
alarm icon will be disappeared.
Press the
ON/OFF button
to turn off the alarm when it is firing.
22
LOUDNESS
The Loudness function enables to get compensation on lower and higher frequency.
The effect will be more audible when the radio is in a lower volume level (Dynamic
Loudness).
1. Press the
LOUDNESS button
to enable the loudness, the display shows
“Loudness On”.
2. Press the
LOUDNESS button
again to disable the loudness, the display shows
“Loudness Off”.
TONE
The Tone function enables the user to adjust the lower and higher sound frequencies.
1. Press the
ON / OFF button
to turn on the radio.
2. Press and hold the
VOLUME/TONE knob
for about 3 seconds, the display shows
“BASS 0”.
3. Rotate the
VOLUME/TONE knob
to set the desired Bass level.
4. Press the
VOLUME/TONE knob
to confirm, the display shows “TREBLE 0”.
5. Rotate the
VOLUME/TONE knob
to set the desired Treble level.
6. Press the
VOLUME/TONE knob
to confirm and return to normal display.
LANGUAGE SETTING
The radio can be configured to a different language.
1. Press the
ON/OFF button
to turn on the radio.
2. Press the
MENU button
, and then rotate the
TUNING/SEEK knob
until the display
shows “System”.
3. Press the
TUNING/SEEK knob
; rotate the
TUNING/SEEK knob
until the display
shows “Language”.
4. Press the
TUNING/SEEK knob
to enter the language adjustment menu.
5. Rotate the
TUNING/SEEK knob
until the desired language appears on the display
(default is English).
6. Press the
TUNING/SEEK knob
to confirm your choice. The display will change to
the chosen language.
GB
