9
GB
NL
D
F
NOTE
During the switch between the amplifier circuits (volume
level 14-15) a pop noise might be audible.
Do not use the radio continuously at the maximum
volume for a long time. This can seriously damage the
radio.
Setting the time format
The display used in standby mode and when the radio is
in use can be set to 12 or 24 hour format.
1.
Press the Standby button to switch on your radio.
2.
Press and hold the Menu button until the Advanced
menu of the current mode shows on the display.
3.
Rotate the Tuning control until 'System' appears on
the display. Then press the Tuning control to enter the
setting menu.
4.
Rotate the Tuning control until 'Time' appears on the
display. Then press the Tuning control to enter the
setting menu.
5.
Rotate the Tuning control until 'Set 12 / 24 hour'
appears on the display. Then press the Tuning control
to enter the setting menu.
6.
Rotate the Tuning control to select either 12 or 24 hour
format. The current hour format will be marked with an
asterisk. Press the Tuning control. If the 12 hour clock
format is chosen, the radio will display a 12 hour clock
with an AM or PM indicator.
Setting the date format
1.
Press the Standby button to switch on your radio.
2.
Press and hold the Menu button until the Advanced
menu of the current mode shows on the display.
3.
Rotate the Tuning control until 'System' appears on
the display. Then press the Tuning control to enter the
setting menu.
4.
Rotate the Tuning control until 'Time' appears on the
display. Then press the Tuning control to enter the
setting menu.
5.
Rotate the Tuning control until 'Set date format' shows
on the display. Then press the Tuning control to enter
the setting menu.
6.
Rotate the Tuning control to select your desired date
format. The current format will be marked with an asterisk.
Press the Tuning control to confirm the selection.
Language function
Your radio can be configured to a different language.
1.
Press the Standby button to switch on your radio.
2.
Press and hold the Menu button until the Advanced
menu of the current mode shows on the display.
3.
Rotate the Tuning control until 'System' appears on
the display. Then press the Tuning control to enter the
setting menu.
4.
Rotate the Tuning control until 'Language' appears on
the display. Then press the Tuning control to enter the
language adjustment menu.
5.
Rotate the Tuning control until your desired language
appears on the display. Then press the Tuning control
to confirm your choice. The display will change to the
chosen language.
Software version
The software display cannot be altered and is just for your
reference.
1.
Press the Standby button to switch on your radio.
2.
Press and hold the Menu button until the Advanced
menu of the current mode shows on the display.
3.
Rotate the Tuning control until 'System' appears on the
display. Then press the Tuning control to enter the setting.
4.
Rotate the Tuning control until 'SW version' appears on
the display.
5.
Press the Tuning control to enter the setting. The
software version shows on the display. Press the Menu
button to exit the software version display.
Software upgrade
Software updates for your radio may be available in the
future. As software updates become available software
and information on how to update your radio can be found
at www.perfectpro.eu
For more information, please contact our Head Office by
sending an email to [email protected]
1.
Plug the USB into the USB socket in the battery
compartment.
2.
Press and hold the Menu button to enter the Advanced
menu of the current mode.
3.
Rotate the Tuning control until 'System' appears on
the display. Then press the Tuning control to enter the
setting menu.
4.
Rotate the Tuning control until 'Software Upgrade'
appears on the display. Then press the Tuning control
to enter the setting menu.
5.
Rotate the Tuning control until 'Yes' is highlighted on the
display. If you do not wish to carry out a software upgrade,
highlight 'No' and then press the Tuning control. The
display will revert back to the previous display.
System reset
If your radio fails to operate correctly, or some digits
on the display are missing or incomplete carry out the
following procedure.
1.
Press the Standby button to switch on your radio.
2.
Press and hold the Menu button until the Advanced
menu of current mode shows on the display.
3.
Rotate the Tuning control until 'System' appears on the
display. Then press the Tuning control to enter the setting.
4.
Rotate the Tuning control until 'Factory Reset' appears
on the display. Then press the Tuning control to enter
the setting.
5.
Rotate the Tuning control until 'Yes' is highlighted on
the display and press the Tuning control to confirm the
setting. A full reset will be performed. The station list
and presets will be erased. Sleep timer settings will
