DAB MODE
Operating the radio – DAB
1. Carefully extend the antenna. Press the
On/Off button
to switch on the radio.
2. If this is the first time to switch on, the radio will be in DAB mode.
3. The first station (in numeric-alpha order 0…9…A…Z) in the list of stations found will
be played. The display will show the station name.
If the radio has been used before, the last used station will be selected.
4. If no signals are detected, “No stations available” will be displayed. It may be
necessary to relocate the radio to a position giving better reception.
You should then carry out an auto scan to find stations, please refer to the section
“Find new stations - DAB”.
Selecting a station – DAB
1. Press the
On/Off button
to switch on the radio. The display will show “Now tuning”
for a few seconds.
2. The display shows the name of the radio station currently selected.
3. Rotate the
Tuning knob
to scroll through the list of available stations.
4. When the desired station name appears on the display, press the
Tuning knob
to select the station. The display will show “Now tuning” while the radio finds the
new station.
Note:
If after selecting a station the display shows “No stations available”, it may be
necessary to relocate the radio to a position giving better reception.
Secondary services – DAB
1. Certain radio stations have one or more secondary services associated with them.
If a station has a secondary service associated with it, then the secondary service
will appear immediately after the primary service as you turn the
Tuning knob
.
2. Press the
Tuning knob
to select the secondary service.
Most of secondary services do not broadcast continually and if the selected service
is not available, the radio will re-tune to the associated primary service.
7
