Dynamic Range Control (DRC) settings – DAB
DRC can make quieter sounds easier to hear when the radio is used in a noisy
environment.
1. In DAB mode, press the
Menu button
, the display shows “Full scan”.
2. Rotate the
Tuning knob
until the display shows “DRC value”. Press the
Tuning
knob
.
3. Rotate the
Tuning knob
to select required DRC setting (default is Off).
DRC Off
DRC is switched off. Broadcast DRC will be ignored.
DRC Low
DRC level is set to low that sent by broadcaster.
DRC High
DRC is set as sent by broadcaster.
4. Press the
Tuning knob
to confirm the setting. The display will return to normal radio
display.
Note:
Not all DAB broadcasts use the DRC function. If the broadcast does not provide
DRC information, the DRC setting in the radio will have no effect.
Prune stations – DAB
If you move to a different part of the country, some of the stations which were listed
may no longer be available. Also, from time to time, some DAB services may stop
broadcasting, or may change location or frequency. The Prune stations function will
delete the unavailable DAB stations from your station list.
1. In DAB mode, press the
Menu button
, the display shows “Full scan”.
2. Rotate the
Tuning knob
until the display shows “Prune”.
3. Press the
Tuning knob
to enter the setting.
4. Rotate the
Tuning knob
to select between “Yes” or “No” (default is No).
Select “Yes” to enable this function if required, otherwise, select “No”.
5. Press the
Tuning knob
to confirm your setting. The display will return to normal
radio display.
Note:
If you have move the radio to a different part of the country, you should also carry
out a search for new stations (please see the section “Finding new stations – DAB”).
9
