5
LCD illumination
When radio is switched on, press any button except the POWER button
will illuminate the LCD display for approx. 15 seconds. However if you use
AC cord to power the radio, the LCD display will be always illuminated
until you turn the radio off by pressing POWER button.
Software version
The software display cannot be altered and is just for your reference.
Press and hold the Info button, the screen will show the software version
(e.g. VERxx).
Reset the radio
If your radio fails to operate correctly or some digits on the display are
missing or incomplete, reset the product as described below to resume
normal operation.
Press and hold the Info button, the screen will show the software version
(e.g. VERxx) first. Continue holding down this button until “RESET”
and then “RESETTING” show on the display. The radio will turn off
automatically and all settings will revert to factory default.
Note:
Before you reset the radio, please remove SD card/USB memory device
to avoid resetting error.
