Set up My EQ profile
. Press and hold the Volume/Tone control until your radio beeps and your radio enters to the EQ
setting menu.
. Rotate the Volume/Tone control to select "My Setting". Then press the Volume/Tone control to
enter the setting.
3. Rotate the Volume/Tone control to select your required Treble level (-5 and +5). Then press the
Volume/Tone control to enter Bass level setting.
4. Rotate the Volume/Tone control to select your required Bass level (-5 and +5). Then press the
Volume/Tone control to confirm the setting.
Using SD cards or USB memory devices
Secure Digital (SD or SDHC) cards or USB memory devices can be used with Rockpro 2 for
playback of MP3 or WMA files. Rockpro 2 has been tested with a range of SD cards and USB
memory devices.
SD cards up to 32GB are supported. However, there are many different card variants available and
not all cards can be guaranteed to work in Rockpro 2. Memory must use the FAT or FAT32 filing
system in order to operate with Rockpro 2.
SD card and USB slots are located at the left hand side of the radio.
Inserting and removing memory devices
1. To insert an SD card into your radio, lift the rubber cover on the left hand side of the radio up and
slid the SD card into the SD card slot. Press down the rubber cover. To remove the card push the
card in slightly and it will pop out allowing removal. USB memory devices plug into the middle slot
on the left hand side, under the SD card slot.
2. To select either SD card or USB mode press the Source button until the desired mode is shown
on the display.
