5. SURFACE TEMPERATURE MODE
P.9
1) Measure the object temperature
- Press [Measure] key to measure the surface temperature of the targeted object.
The HOLD icon OFF, the temperature updated every second.
- Release [Measure] key to stop the measurement. The HOLD icon appeared.
2) Switch between Min/Max Temperature
- Press [Min/Max] key to switch the lower display for MAX Temp and MIN Temp
3) To turn on or off laser
- Press [Laser] key to turn ON or OFF the laser function.
4) To change temperature unit
- Press [C/F] key to toggle the unit of temperature.
5) To adjust Emissivity
- Press [Laser + Measure] key to enter emissivity adjustment mode.
- Press [Min/Max] to increase emissivity value
- Press [C/F] to decrease emissivity value
- If there is no key press for 5sec, it will exit the emissivity adjustment mode.
It is used to measure the surface temperature of the targeted object.
