Perfect Aire 3PAMSHHQC18-MZO2, Техническое и сервисное руководство

Страница: 44 / 74

1 0 . PIPING WORK AND REFRIGERANT CHARGE
Completion
of Ref.
Piping
Repairing
of Leakage
Part
Check of
Pressure
Decrease
Applying
Nitrogen
Gas
Pass
Procedure
10.3 Air tight test
Do use nitrogen when performing air-tight test.
Connect the gauge manifold using charging hoses with a nitrogen cylinder to the check joints of the
liquid line and the gas line stop valves. Perform the air-tight test. Don't open the gas line stop
valves. Apply nitrogen gas pressure of 550psi. Check for any gas leakage at the flare nut
connections, or brazed parts by gas leak detector or foaming agent. It is OK if gas pressure does
not decrease. After the air tight test, release nitrogen gas.
Air tight procedure
1 0 .4 Additional refrigerant charge
Although refrigerant has been charged into this unit, additional refrigerant charge is
required according to the piping length.
•
The additional refrigerant precharge quantity should be determined and charged into the system
according to the following procedure.
•
Record the additional refrigerant quantity in order to facilitate maintenance and servicing activities.
Refrigerant charge before shipment (W0 (kg))
W0 is the outdoor unit refrigerant charge before shipment
；
Xg is additional refrigerant outdoor unit needed to charge according to piping length during
installation.
Model
Refrigerant
precharged before
shipment(W0(
oz g))
Additional refrigerant charge
18K
63.49/1800
[L-50ft (15m)]×0.807oz/5ft (15g/m)
36K
105.82/3000
[L-98ft (30m)]×0.807oz/5ft (15g/m)
24K
81.13/2300
[L-75ft (22.5m)]×0.807oz/5ft (15g/m)
42K
120/3400
[L-125ft (37.5m)]×0.807oz/5ft (15g/m)
40