E305W3 - E305W3-G
V. 01 – 14/07/2015
2
©Velleman nv
USER MANUAL
1.
Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could
harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it
should be taken to a specialized company for recycling. This device should be returned to your
distributor or to a local recycling service. Respect the local environmental rules.
If
in doubt, contact your local waste disposal authorities.
Thank you for choosing Perel! Please read the manual thoroughly before bringing this device into service. If the
device was damaged in transit, don't install or use it and contact your dealer.
2.
Safety Instructions
•
Indoor use only.
•
Keep the device away from children and unauthorised users.
•
Do not connect to an appliance with a load exceeding the capacity of the timer (see Technical
Specifications).
•
Do not use a timer to control an appliance containing a heating element (cooking appliance, heater, iron…).
•
Never leave the appliance unattended while in use.
•
Always make sure the plug of the connected appliance is fully inserted into the timer.
•
Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the
dealer will not accept responsibility for any ensuing defects or problems.
3.
Operation
3.1
Setting the day and time
1.
Unplug the timer from the outlet.
2.
Press and hold
SET
until the day flashes.
3.
Press
or
to change the day. Press
SET
to confirm. The hour digit flashes.
4.
Press
or
to change the hour. To change it more quickly, press and hold
or
. Press
SET
to confirm.
The minutes digit flashes.
5.
Press
or
to change the minutes. Press
SET
to confirm.
Time Format (AM/PM or 24 hour)
To change the time format, press and hold
CLOCK
until the display changes.
3.2
Daylight savings time function
1.
Press
CLOCK
and
at the same time. The time display automatically adds one hour and "S" is shown on
the LCD.
2.
Press
CLOCK
and
again to exit daylight savings time.
3.3
Setting a program
1.
Unplug the timer from the outlet.
2.
With the LCD in normal time display, press
once to change to program setting display. "1ON" will be
shown on the lower left corner of the LCD:
o
"1" indicates the program group number (program group is from 1 to 14)
o
"ON" indicates power on time.
o
"OFF" indicates power off time
3.
Press
or
to set the program group and on/off status. Press
SET
to confirm.
4.
Press
or
to set the day. Press
SET
to confirm.
5.
Press
or
to set the hour. Press
SET
to confirm.
6.
Press
or
to set the minutes. Press
SET
to confirm.
