Peregrine Systems DPND-523-EN12, Руководство по установке

Страница: 65 / 170

(Optional) Connect data backup equipment and pager hardware | 65
Setup Guide
Note: To suppress this warning, you need to turn off the “UPS warning,” see
Disabling UPS warnings on page 89 .
(Optional) Connect data backup equipment and pager
hardware
Connecting data backup equipment is optional. Connecting pager hardware is
also optional.
If you choose to connect an external modem for paging or a tape drive for data
backup, you should do so now. For more information on paging, see the
Network Discovery User Guide . For more information on backing up and restoring
data, see Backup and Restore on page 129 .
For tape drive requirements, see Appendix C, Extra Hardware on page 157 .
Installing data backup equipment and pager hardware are the responsibility of
the customer. If you have any problems, contact Peregrine Systems Customer
Support.
Note: You can add a tape drive later, after Network Discovery is up and running.
You will not have to restart the Peregrine appliance. However, after
Network Discovery has been running, if you unplug the tape drive and
plug it in again, the tape drive may lock. To unlock it, you must restart the
Peregrine appliance.
Note: It is also possible to back up data without a tape drive by using an FTP
server instead.
(Optional) Connect the Peregrine appliance to a
telephone line
Connect the Peregrine appliance to a telephone line, if you have chosen a
telephone and modem as your means of receiving customer support. (For other
options, see
Choose how to receive Peregrine Systems Customer Support on
page 27 ).