Install
Instrument
with 1.5m free
space (from
widest point)
around it.
1.5m
1.5m
Ground Fixed
Babel Drum
Page 1 of 3
M10x200 Threaded bar
x3
M10 BZP Nut
x6
1
. Unpack ground fixing legs
3no.
x2
x2
x2
x3
KS2 400mm
Ground Surface
KS1 – 700mm
KS2 – 870mm
Adult- 1070mm
Adult
Installation Instructions
Large 8 note
Small 6 note
Played with hands
22 Kg
13.4 Kg
KS2
Adult 400mm
KS2 600mm
KS1 770mm
KS1 570mm
Ground Fix
Components:
Weight of heaviest part
17.5kg
(Large Babel Drum)
Weight of heaviest part
13.4kg
(Small Babel Drum)
BS EN 1176
Metric Conversion:
200mm/ 8”
400mm/ 16”
570mm/ 22”
600mm/ 24”
700mm/ 28”
770mm/ 30”
870mm/ 34”
1070mm/ 42”
1.5m/ 59”
CAUTION: Drum
surface can get hot
in direct sunlight, if
possible install in
shaded areas.
Spares available form
percussionplay.com
or from your
local distributor
2
. Lay packaging out on floor
or assemble on non-abrasive
surface to prevent marking of
polished stainless steel.
3
. Align holes on legs
(opposite end to polished
domes) and secure in place
using 3no. M10 x 200mm
threaded bar and 6no. M10
nuts provided
Tools required 2no. 17mm
metric spanner/wrench (
11
/
16
inch or alternatively using
adjustable wrench)
4
. Invert assembled frame so
domed ends face upwards.
5
. Place 8mm Hex Key
supplied into hole in leg and
lock into internal bolt.
6
. Remove M10 nut on
opposite side of leg and
keeping Hex Key in place, slide
black polyurethane damper
over bolt until flush with end
of bolt. Repeat for other 2 legs
8
. Align holes in side of babel
drum with bolts on legs.
9
. Using 8mm Hex Key screw
bolts into drum to secure in
place.
Use thread locking solution
All hole locations are laser cut
for accuracy to ensure holes in
drum align perfectly with legs.
7
. Unpack babel drum leaving
black film in place to protect.
10
. Using TX40 driver provided
secure M8 x 25mm security
bolts into external holes in
legs 3no. Use thread lock
solution
Instrument
Components:
M8x25mm Pin Torx
x3
